Longyixing Chemicals
Description:
Lotrene@ FD0474 is mainly recommended for the extrusion of very high clarity blown and cast films. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.
The molecular structure of LotreneR FD0474 provides excellent clarity, high gloss and low haze films. This structure also leads to excellent processability.
| POLYMER PROPERTIES | VALUE | UNIT | TEST METHOD |
|---|---|---|---|
| Melt Flow Index | 4 | g/10 min. | ASTM D1238- |
| Density @ 23 °C | 0.923 | g/cm³ | ASTM D1505- |
| Crystalline Melting Point | 108 | °C | ASTM E794- |
| Vicat Softening Point | 87 | °C | ASTM D-1525 |
| Tensile Strength @ Yield | 11月11日 | MPa | ASTM D882- |
| Tensile Strength @ Break MD/ TD | 23/20 | MPa | ASTM D882- |
| Elongation @ Break MD/ TD | 335/610 | % | ASTM D882- |
| Impact Strength, F 50 | 90 | g | ASTM D-1709 |
| Tear resistance MD/ TD | 75/40 | N/mm | ASTM D- 1922 |
| Coefficient Of friction | 0.09 | - | ASTM D1894 |
| Haze | 7 | % | ASTM D1003- |
| Gloss @ 045 | 63 | - | ASTM D2457- |
(Film properties stated above have been obtained using 40 um blown films laboratory test specimens produced under following conditions: 45 mm screw with L/D = 30, die diameter 120 mm, die gap 1.56 mm, BUR 2.5:1).
Lotrene@ FD0474 can be easily processed on all types of extruders designed for polyethylene.
The melt temperature is suggested to be in the range of 150-140 °C.
The best properties of the blown film are achieved at blow up ratios between 2:1 and 3:1.
The recommended thickness range is from 15 μm to 100 μm.
Polyethylene products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and/or heat in any form since this may adversely affect their properties. As a general rule, our products should not be stored for more than three months from receipt date.
Under normal conditions LotreneR products do not present a toxic hazard through skin contact or inhalation.
For detailed information please refer to the Safety Data Sheet.
Lotrene⑧polyethylene products manufactured by Qatar Petrochemical Company (QAPCO) Q.S.C. comply with US, EU and other food contact legislations. Limitations may apply.
All QAPCO Lotrene products are complying with REACH Regulation 1907/2006/EC. The aims of this regulation are to improve the protection of human health and the environment through better and earlier identification of the intrinsic properties of chemical substances.
Please contact your Muntajat representative for detailed compliance certificates.
NOT SUITABLE FOR PHARMACEUTICAL OR MEDICAL APPLICATIONS
The values reported in this technical data sheet are the results of tests carried out in accordance with standard test procedures in a laboratory environment. Actual properties may vary depending on batch and extrusion conditions. Therefore, these values should not be used for specification purposes.Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question, and is further advised against relying on the information contained herein as it may relate to any specific use or application.
It is the ultimate responsibility of the user to ensure that the product is suitable for, and the information is applicable to, the user's specific application. QAPCO does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or written, expressed or implied, or allegedly arising from any usage of any trade or from any course of dealing, in connection with the use of the information contained herein or the product itself.
The user expressly assumes all risks and liabilities, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the product itself. Trademarks may not be used in any manner other than expressly authorized in a written agreement and no trademark or license rights of any kind are granted hereunder, by implication or otherwise.
Longyixing Chemicals Co., Ltd
Longyixing Chemicals Co.,Ltd, with 10+ years of experience in TPU R&D and manufacturing, we proudly serve clients across 30+ countries. Our 20,000+ sqm advanced production facility houses 7 fully automated production lines, delivering an annual capacity of 50,000+ tons to meet your TPU needs efficiently and reliably.
